Applus+ around the world
Close Countries Panel
  • GLOBAL SITE
  • Belgium
  • Brazil
  • China
  • Czech Republic
  • France
  • Germany
  • India
  • Indonesia
  • Italy
  • Japan
  • Malaysia
  • México
  • Netherlands
  • Poland
  • Russia
  • Slovakia
  • South Africa
  • South Korea
  • Spain
  • Sweden
  • Taiwan
  • Thailand
  • Turkey
  • UK
  • United Kingdom
  • USA
Close Divisions Panel
Applus+ DIVISIONS
Energy & Industry Division
Industrial and environmental inspection, vendor inspection, technical assistance, non-destructive testing (NDT) and technical staffing for all type of industries.
Logo RTD Logo VELOSI Logo NORCONTROL Logo Intec Logo K2
Logo Ingelog Logo JAN Logo Kiefer Logo Novotec Logo NRay
Logo PTJava Logo Skc Logo XRay Logo Qualitec
Laboratories Division
Multidisciplinary laboratories.Testing and engineering for product development. Conformity testing and product certification. SYSTEMS CERTIFICATION.
Logo Applus Laboratories Logo Applus Certification
Automotive Division
Statutory vehicle inspection services and emission & gas testing solutions worldwide.
Logo Applus Automotive Logo Applus ITVE Logo NCT Logo Applus Bilsyn Logo K1
Logo Technologies Logo ITVs Logo Riteve
IDIADA Division
Design, engineering, testing and homologation services for the automotive industry worldwide.
Logo Applus IDIADA

Ferrite Testing

INTRODUCTION
Ferrite testing is a fast, inexpensive and accurate way to measure delta ferrite content in austenitic and duplex stainless steels. Ideal ferrite content provides a balance between ductility, toughness, corrosion resistance and crack prevention.
THE Applus+ SOLUTION
Applus+ are able to deliver bespoke ferrite-testing services to any industry, at any stage of manufacture, anywhere in the world. Clients can expect the highest degree of quality control, through strict internal competency testing and technical procedures.
 
Applus+ is able to deliver results by the placement of a single probe on the surface of the specimen, whereby the reading is displayed automatically and stored in the instrument. For easy ferrite-content measurements along a weld seam, our testing instruments offer continuous measurement-capture functions. When scanning the weld seam, the continuous readings are captured and stored. This provides a ferrite-content profile along the weld seam. Ferrite-content measurements can be taken regardless of the properties of the substrate material and starting at a plating thickness of 3mm. Corrective calibrations to customer-specific calibration standards or correction factors can be used to take into account influences of the specimen shape, plating and substrate thicknesses.
 
Results are generally available instantly and, depending on the client’s requirements, can be provided as spot or profile readings and as percentages or as ferrite numbers.
TARGET CUSTOMERS
Chemical, energy and processing plants are often subject to heat, aggressive media and high pressure. Steel destined for these plants must therefore be highly corrosion- and acid–resistant, maintaining resilience even at high temperatures. If the ferrite content is too low, then the welded material is susceptible to hot-cracking; if the ferrite content is too high, the toughness, ductility and corrosion-resistance of the steel are reduced. For duplex steel, a ferrite deficit in the area of the weld seam results in stress-corrosion cracking and a subsequent reduction in strength.
 
Ferrite testing may be carried out on site at any stage of steel manufacture. Only testing throughout the course of the manufacturing process can provide the assurance that the ferrite content has not been adversely affected at any stage of processing at the expense of the steel’s mechanical or corrosion-resistance properties.
 
KEY CUSTOMER BENEFITS
Choosing Applus+ as their ferrite-testing partner will provide clients with:
  • Fast, reliable measurements and on-the-spot results
  • Verification of adherence to welding procedures for heat control
  • Verification that corrosion-resistant properties remain after welding
  • Increased reliability, safety and longevity of process equipment, leading to cost savings and a reduction in risk to operators
Ferrite Testing Ferrite Testing Ferrite Testing
 
Site map